Treatment of head and treatment principle 1.Cryo freezing handpiece
|Type||Cryolipolysis + 40kHZ Cavitation + Multipolar RF+lipo laser|
|Voltage||220V/50Hz or 110V/50Hz according to the mark on the machine|
|Screen||8-inch wide color touch screen|
|Cooling device output temperature||0~-10|
|Cooling device output pressure||0-100Kpa|
|Cooling liquid||pure water|
|Default working time||0-90min|
|Ambient temperature||5 ~ +40|
As triglyceride in the fat will turn into solid at 4°C- -10°C, it delivers the frozen waves through non-invasive therapeutic apparatus to the parts where fat needs to be reduced. The triglyceride converted into solid will age prematurely. Then through normal metabolism, they are gently eliminated and discharged out of the body so that the adipose layer will gradually be reduced and the purpose of partial weight loss can be served.
1) Put on the Anti-freeze Mask (Menbrance)on the treat area.
2) Put the Cryolipolysis handle on the treat area
3) Make every part operation for 10 -20 minutes.
4) After operation all locations, take off the mask(menbrance), and clean the cryolipolysis head.
5) Operating once per week, 10 times a course of treatment.
6)The effective temperature for cryo is 0 ºC
2.40K HZ Cavitation handle
It uses the strong ultrasonic head to shoot 40,000Hz ultrasonic, after entering the body, will make the fatty cells produce mighty cracking effect and fatty cells friction, As the membranes of fat cells do not have the structural capacity to withstand the vibrations, the effect of cavitation easily breaks them, while not having an impact on the vascular, nervous and muscular tissue effectively exhaust the heat energy, exhaust cells water, let fatty cells shrinking. The broken lipocyte (fat cells) are then moved to the liver and safely metabolized out of the human body, which is assisted by drinking a lot of water. Finally, some content of the adipocytes is metabolized by the liver and eliminated in the urine.
1)Fat such as freeze, after returning to normal temperature, to do cavitation treatment, also can use cavitation partial weight loss from all parts of the body.
2)Abdominal operation time is about 15 minutes.
3)Every part of the operation, please refer to the figure to operate.
3. Mutipolar RF handle
It takes the most advanced RF technique and energy, directly penetrate into deep-seated cellulite. With targeted oriented RF output, it makes the fatty cells in quick active state, produces heat friction, higher the partial temperature. Through the sweat gland, liver sausage circulation and lymph, exhaust the redundant fatness and toxins out of the body, so get the effect of cellulite dissolving.
1) After cavitation operation, for radio frequency (rf) dissolve fat, fat through lymphatic drainage.
2) Abdominal operation time is about 15 minutes.
Cavitation and RF operation technique is the same, please refer to the following figure.
The Lipo Laser utilizes the latest low level/cold laser technology to reduce girth and spot fat over almost all areas of the body without surgery, downtime or redness. A typical 40-minute waistline treatment can reduce an individual by ½ to ¾ of an inch while a full protocol of eight treatments usually results in multiple inch loss.
Operation Steps1)Check all accessories whether they are connected right or not,clean or disinfect the accessories.
1. The current non-surgical medical cosmetic technologies and new hot spot
2. More advanced than liposuction, fat melting technology
3. European most popular new way to lose weight
4. Can be up to 26% of the treatment area of new technology to destroy fat
5. Superior RF and ultrasound fat melting technology
6. Selectivity can be cut a fat waist, back fat and cellulite micro innovations
2)Clean the skin .
3)Mark the area where need to treat
4)Put on the Anti-freeze Mask on the treat area.
5)Put the Cryolipolysis handle on the treat area.
6)Plug in the power and switch on the general power on of the control panel.
7)According the client's fat part status, adjust the Intensity and the Vacuum mode and Working time.
8)Turn on the Cryolipolysis system. Working on the body. At the same time, you can adjust the intensity of the system by the button on the handle piece.
9)After treatment, please pause the working, then switch off the power. Clean the spare parts and place them in original.Display of machine
Our ServicesOne year warranty: if there any problem happens with machine, we will repair it free of charge
Convenient training: operation video is available,and we can provide the online training
OEM/ODM services: logo, language, interface can specially be designed Delivery and ShippingDelivery within 3-5 days off season, 5-7 days in busy season after payment
Shipping Way: DHL, UPS, TNT, FedEx etc. in door to door service by air
We are specialized in Beauty and Medical Equipment with professional R&D department, Design &Production and Sales &Service team. Our machines are sold all over the world, and get good feedback .